Part of BASF Forward AM

Available in 1.75mm & 2.85mm

Ultrafuse EPR PET

Ultrafuse EPR PET prints as easy as PLA but is much stronger. Available in 9 RAL Colors

Ultrafuse PET

Ultrafuse PET (previously Innofil3D EPR InnoPET) is made from a premium, food approved PET.  This is widely used to produce food and beverage containers and bottles. The high-quality filament will give you outstanding printing results: a good layer adhesion, high resolution and it easy to handle.

It is also easy to use, doesn’t generate fumes and shows great detail. Ultrafuse PET has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. Furthermore, there is no need for a heated bed since Ultrafuse PET adheres very well to tape.

Advantages of Ultrafuse PET:

  • Made out of food approved raw materials: safe to use
  • Print as easy as PLA, but much stronger
  • Watertight
  • Great colors and finish
  • EPR PET can be 100% recycled.

Available via our Resellers World Wide!

We have the following Technical Data Sheets available:

Other languages are available upon request. Please send a little email for more information

Our recommended print settings are:

  • Nozzle temperature; 220 ± 10℃
  • Bed temperature; Approx. 75℃
  • Bed modification; Tape or glue below 60℃
  • Active cooling fan; YES: 100%
  • Layer height; 0.08 – 0.2 mm
  • Shell thickness; 0.4 – 0.8 mm
  • Print speed; 40 – 80 mm/s

1