Please note; our webshop will be discontinued. Please check our resellers!
0 products € 0,00

Our

Product categories

Standard

Our standard filaments are Ultrafuse PLA, Ultrafuse PET and Ultrafuse ABS.

Sustainable

Ultrafuse sustainable filaments: sustainability meets high performance!

Engineering

Engineering filaments give 3D printing professionals a competitive edge.

Support

Ultrafuse offers the support materials Ultrafuse BVOH, and Ultrafuse HiPS.

Flexible

A broad and growing category of Ultrafuse flexible filaments

Metal

A cost-effective stainless steel desktop FFF printing solution

Our

Product categories

Everything comes together in

The Factory

International standards

Material data

Overview of

Engineering filaments - technical data

Ultrafuse PET CF15

Ultrafuse PET CF15 (previously Innofil3D PET CF15) is a polyethylene terephthalate reinforced with 15% carbon fiber. PET CF15 is easier to process than other carbon fiber reinforced filaments in our portfolio.

Users of Ultrafuse PET CF15 will be able to create 3D printed objects that can withstand higher mechanical and thermal conditions than with normal PET filament. With this engineering filament, new 3D printing applications with higher requirements can be developed.

With its heat resistance, high strength and stiffness, it is a filament for a wide range of industrial applications. Its high dimensional stability and very low moisture uptake make it a perfect solution for applications that work in a humid environment. Key properties:

  • Strong and stiff parts
  • Easy to process
  • Very low moisture absorption
  • Heat resistant up to 100°C
  • High dimensional stability
  • Compatible with HIPS for breakaway support
  • Excellent surface finish

Ultrafuse PET CF15 combines easy processability, very low moisture uptake with a high level of strength and stiffness at an affordable cost.

Data Sheets of Ultrafuse PET CF15:

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse PAHT CF15

Polyamide is a thermoplastic that is used in wide range applications in different industries. PAHT CF15 (previously Innofil3D PAHT CF15) has a special formulation, which brings more dimensional stability and allows it to work under 150°C continuous temperatures with a peak temperature of 180°C, which is impossible with standard PA. Thanks to the reinforcement with  15% carbon fiber stiffer products can be printed, which opens new doors for the printing of demanding applications.

Key properties:

  • Higher chemical resistance than most PA grades
  • High-temperature resistance up to 150°C
  • Strong and stiff parts
  • High dimensional stability
  • Easy to process
  • Low moisture absorption

Ultrafuse PAHT CF15 combines high temperature and chemical resistance with extreme mechanical properties. Due to the high dimensional stability, there will be hardly any shrinkage during printing. This ensures an easy print experience.

Data Sheets of Ultrafuse PAHT CF15:

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse PAHT CF15 product video

Ultrafuse ASA

ASA (Acrylonitrile Styrene Acrylate) is part of the ABS family and is ideal for outdoor usage due to its properties: resistance to UV and toughness. (Used to be Innofil3D ASA, new name – same product!)

Data Sheets of Ultrafuse ASA:

Ultrafuse ASA Technical Data Sheet
Ultrafuse ASA Material Safety Data Sheet

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse ABS Fusion+

Ultrafuse ABS Fusion+ (previously Innofil3D ABS Fusion+) is an ABS filament that is engineered and optimized for 3D-printing.
In contrast to normal ABS, Ultrafuse ABS Fusion+ has the following great features:

  • Direct printing on heated glass or print bed surfaces
  • Easy to print experience due to low warping and a high success rate of prints
  • High heat resistance
  • Adheres to water-soluble support

Data Sheets of Ultrafuse ABS Fusion+:

Ultrafuse ABS Fusion+ Technical Data Sheet
Ultrafuse ABS Fusion+ Material Safety Data Sheet
Ultrafuse ABS Fusion+ Onepager

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse PLA PRO1

Ultrafuse PLA PRO1 (previous name: Innofil3D PRO1) is a tough PLA which offers major key advantages:

  • SPEED:  Reduce your printing time with 30%-80%, (subject to printer and object limitations)
  • STRENGTH:  Excels overall beyond printed ABS in mechanical properties
  • VERSATILITY:  One filament that can be tuned towards blazing speed and excellent surface finish
  • CONSISTENCY: Truly consistent filament, also between colors and batches, it will perform as expected, every time.

Data Sheets of Ultrafuse PLA PRO1:

Ultrafuse PLA PRO1 Technical Data Sheet 
Ultrafuse PLA PRO1 Material Safety Data Sheet
Ultrafuse PLA PRO1 Onepager

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse Z PCTG

Ultrafuse Z PCTG is an ESD safe filament that has been developed especially for the printing of handheld tools, various assembly, and electronic fixtures, robotics, automation components, and parts for explosion-proof environments.

It shows very smooth surface properties, which help to prevent latent failures in electronics. Ultrafuse Z PCTG is an easy to print material, with a significantly increased impact strength when compared to PETG.

Data Sheets of Ultrafuse Z PCTG:

Ultrafuse Z PCTG Technical Data Sheet
Ultrafuse Z PCTG Material Safety Data Sheet
Ultrafuse Z PCTG Onepager

If you would like to have the datasheets in your language, please send us a little email.

Ultrrafuse PP

Polypropylene or PP is widely known as a solution for automotive applications, (household) appliances and liquid containers. Ultrafuse PP is the new name for Innofil3D PP, a new name – the same product!

Ultrafuse PP filament has great properties:

  • Low density
  • Good chemical resistance
  • Resistant to fatigue
  • Good elasticity and toughness
  • Insulation

Data Sheets of Ultrafuse PP:

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse PA

Ultrafuse PA is specially developed for FFF printing based on BASF´s polyamide portfolio known as Ultramid®. With its unique mechanical properties due to its chemical structure, it is suitable for wide range applications working in a broader temperature range.

Data Sheets of Ultrafuse PA:

Ultrafuse PA Technical Data Sheet
Ultrafuse PA Material Safety Data Sheet
Ultrafuse PA Onepager

If you would like to have the datasheets in your language, please send us a little email.

Ultrafuse PP GF30

Polypropylene is one of the most preferred thermoplastics in different industries, especially in the automotive sector. However, reaching a high level of reinforcement was always a problem when making filaments. Ultrafuse PP GF 30 is the new name for Innofil3D PP GF30, a new name – the same product!

Ultrafuse PP GF30 contains special glass fibers that are designed for filament making and 3D printing. This will ensure the printed objects are functionally working, under certain temperature and mechanical loads.

Thanks to its UV-resistance, it is more suitable than any other PP based filament for applications that are directly exposed to sunlight. Key properties of Ultrafuse PP GF30 are:

  • Excellent chemical resistance
  • Low density
  • Low moisture uptake
  • High heat resistance
  • Improved UV-resistance

PP inherently absorbs less moisture than PA. In combination with the high level of glass fiber reinforcement, Ultrafuse PP GF30 is a­ filament of selection for exceptional working environments.

Ultrafuse PP GF30 combines great features that couldn’t be combined before: printing stiffer parts with UV resistance is now possible. To take full advantage of this, please follow the print guidelines.

Data Sheets of Ultrafuse PP GF30:

If you would like to have the datasheets in your language, please send us a little email.