Please note; our webshop will be discontinued. Please check our resellers!

Ultrafuse® ABS Fusion+ Black – 1.75mm – 750g

Ultrafuse® ABS Fusion+ (previously Innofil3D ABS Fusion+, different name, same high-quality product!) is an engineering ABS filament,  that is optimized for 3D-printing.

Product details

  • Product Code ABSF-0208a075
  • Product Colour Black
  • Product Diameter 1.75mm
  • Product Product ABS Fusion+ Black - 1.75mm - 750g
  • Product RAL n/a
  • Product Weight 750gr

Out of stock


Ultrafuse ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for 3D-printing.

This special grade has been developed in collaboration with Polyscope Polymers, an expert in enhancing polymer behavior with Styrene Maleic Anhydride (SMA).

Polyscope is renowned for its material solutions in the automotive industry. The properties of ABS Fusion+ are:

  • Chemical resistance
  • High heat resistance
  • Low warping
  • Adheres to water-soluble support
  • Tough

ABS is a thermoplastic which is used in many applications.

Although ABS has been classified as a standard material in 3D-printing it used to be very challenging to process, until now. We managed to develop an ABS grade which can be directly printed on glass without any fluids or tape and has a higher success rate of prints due to extreme low warping.

To provide users with valuable information we have collected data regarding the mechanical properties of the 3D-printed specimens according to the ISO standards.


We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.

It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

PRINT TEMP | 240 – 260°C

PRINT SPEED | 40 – 80 mm/s

BED TEMP | 100 – 110°C


BED ADHESION | Clean Glass*

FAN SPEED | 0% (Max 25%)


LAYER HEIGHT | 0.1 – 0.2 mm

* for easy removal of object smear a few drops of alcohol between the glass and object after printing.


Technical & Mechanical data sheet