Ultrafuse® ABS Fusion+ (previously Innofil3D ABS Fusion+, different name, same high-quality product!) is an engineering ABS filament, that is optimized for 3D-printing.
€ 44,95 € 37,15 ex.VAT for USA customers only!
Ultrafuse ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for 3D-printing.
This special grade has been developed in collaboration with Polyscope Polymers, an expert in enhancing polymer behavior with Styrene Maleic Anhydride (SMA).
Polyscope is renowned for its material solutions in the automotive industry. The properties of ABS Fusion+ are:
ABS is a thermoplastic which is used in many applications.
Although ABS has been classified as a standard material in 3D-printing it used to be very challenging to process, until now. We managed to develop an ABS grade which can be directly printed on glass without any fluids or tape and has a higher success rate of prints due to extreme low warping.
To provide users with valuable information we have collected data regarding the mechanical properties of the 3D-printed specimens according to the ISO standards.
We select the best raw materials available from renowned suppliers.
Dedicated people, highest standards.
Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.
All our products are 100% traceable to the source.
PRINT TEMP | 240 – 260°C
PRINT SPEED | 40 – 80 mm/s
BED TEMP | 100 – 110°C
FILL DENSITY | 20%
BED ADHESION | Clean Glass*
FAN SPEED | 0% (Max 25%)
TOP/BOTTOM THICKNESS | 0.8 – 1.0
LAYER HEIGHT | 0.1 – 0.2 mm
* for easy removal of object smear a few drops of alcohol between the glass and object after printing.
All other files are available on the 3D Printing Profiles Page.
Importing the Ultrafuse material profiles into the Cura Material Manager will make our materials available to select in Cura directly. This makes it easy to start printing with our materials on Ultimaker printers and will make sure you are using the right settings for your print.
To import the material profile in the Cura interface go to
Settings > Materials > Manage Materials… Next, press the Import button and select the downloaded profile you want to import.
Please note, We see this profile as a general-purpose profile.
For additional print settings, we advise checking our technical datasheets.
If you need more information or support, feel free to contact us at info@innofil3D.com
For now, all Ultrafuse Cura profiles for the Ultimaker printers are covered and this list will continuously be updated.
Behind the scenes, Innofil3D is also working on Cura print profiles for other printer brands.
At the same time, print profiles for other slicer programs will be made available once finalized.
We will give an update in our Blog & News section when new profiles are released, so you won’t miss a thing.