Please note; our webshop will be discontinued. Please check our resellers!

Ultrafuse® PET CF15 Black – 1.75mm – 750g

Ultrafuse PET CF15 (previously Innofil3D PET CF15, different name, same product!) is a functional filament with high dimensional stability and very low moisture absorption,  suitable for a humid environment.

Product details

  • Product Code PCF-0350a075
  • Product Colour Black
  • Product Diameter 1.75mm
  • Product Product Innofil3D PET CF Black - 1.75mm - 750g
  • Product RAL n/a
  • Product Weight 750gr

Out of stock


Ultrafuse PET CF15 (previously Innofil3D PET CF15, different name, same high-quality product!)is a functional 3D printing material optimized to meet your requirements. Its high dimensional stability and very low moisture absorption make it a perfect material in a humid environment. The heat-resistant property, strength, and stiffness of Ultrafuse PET CF15 make this filament highly suitable for a wide range of industrial applications. Key properties:

  • High dimensional stability
  • Heat resistant up to 74°C
  • Very low moisture absorption
  • Low abrasion
  • Compatible with soluble support
  • Strong and stiff parts
  • Excellent surface finish

Ultrafuse PET CF15 combines easy processability, very low moisture uptake and affordability with great strength and stiffness. Applications that require strong and stiff parts with an excellent surface finish will benefit from Ultrafuse PET CF15.


We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

PRINT TEMP;                   245 – 265°C
PRINT SPEED;                 40 – 80 mm/s
GLASS BED TEMP;          70 – 80°C

LAYER HEIGHT*             0.2 mm
INFILL DENSITY***        20%

FAN SPEED                        0%
TOP/BOTTOM                   1.0 – 1.2 mm

*For excellent layer adhesion a layer height of 0.2mm is recommended. Lower layer heights can also cause clogging of the nozzle.

**Also we recommend a nozzle diameter of at least 0.6 mm to prevent clogging of the nozzle. For good strength and aesthetic results, adjust the EXTRUSION WIDTH to the diameter of the nozzle.

***Higher infill density will create stronger and more solid parts.

Please check also the Quick Reference Guide



Technical & Mechanical data sheet