Please note; our webshop will be discontinued. Please check our resellers!

Ultrafuse® PET – White – 1.75mm – 750g

Ultrafuse® PET  (previously Innofil3D EPR InnoPET, different name, same high-quality product!) prints as easy as PLA but is much stronger. Available in 10 translucent RAL colours and diameters 1,75 mm

Product details

  • Product Code Pet-0303a075
  • Product Product EPR InnoPET- White - 1.75mm - 750gr
  • Product Colour White
  • Product RAL 9010
  • Product Diameter 1.75mm
  • Product Weight 750gr

Out of stock


Ultrafuse® PET  (previously Innofil3D EPR InnoPET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).

PET is widely used to produce food and beverage containers and bottles.
This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.

It has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled.


We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.
It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

To make the best prints with Ultrafuse PET, we use the following settings on an Ultimaker and Wanhao Duplicator;

  • Temperature at 210 degrees
  • Heated bed at 75 degrees
  • Speed between 30 and 70mm
  • Ready with printing? The heated bed should cool down and you just can take the print off of your bed


Technical & Mechanical data sheet