Please note; our webshop will be discontinued. Please check our resellers!

Ultrafuse® TPS 90A Natural White – 2.85mm – 750g

Ultrafuse® TPS 90A is an elastomer based on the raw material SEBS.

Product details

  • Product Code TPS-2130b075
  • Product Colour Natural White
  • Product Diameter 2.85mm
  • Product RAL n/a
  • Product Weight 750gr

Out of stock


Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material has a low moisture uptake, which allows for printing without pre-drying.
Ultrafuse® TPS 90A has a convincing layer adhesion that creates a smooth surface and low warpage which makes it an excellent material choice for end-use parts. In addition, the good adhesion to ABS and PP allows for printing of multi-material parts.

Ultrafuse® TPS benefits at a glance

  • Soft touch
  • Non-slip properties
  • Reduced moisture uptake
  • Excellent layer adhesion
  • Very good low-temperature flexibility


We select the best raw materials available from renowned suppliers.

Dedicated people, highest standards.

Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches.

It will perform as expected, every time.

All our products are 100% traceable to the source.

Tips & tricks

To make the best prints with Ultrafuse TPS 90A, we recommend the following settings;

  • Nozzle temperature: 260-280 °C
  • Bed temperature: 70-90 °C
  • Build Chamber Temperature: Passively heated
  • Nozzle diameter: ≥ 0.4 mm
  • Bed modification: PEI, PI or glue
  • Print speed: 10-30 mm/s



Technical & Mechanical data sheet