Part of BASF Forward AM

Jun 28, 2016

the Professional Series – PRO1


written by Hendrie Feringa

Innofil3D is introducing their new line of filament; the Professional Series AND the first new filament PRO1. Continue reading to meet this new filament!

with Professional Series – PRO1

Innofil3D polymer chemists have developed PRO1 as a high-speed engineering thermoplastic that prints as easy as PLA at speeds previously considered unusable and yet it retains far better mechanical properties that exceed printed ABS objects, something that the most demanding users have always had to make a compromise on prior to PRO1.

By varying the print settings for this multi-purpose robust filament, users can home in on optimizing for speed, strength, surface quality or a mix of those qualities beyond performance levels of traditional filaments.

When you find yourself in an environment that requires reliable performance print after print, look no further than to increase your productivity with PRO1.

Efficiency and performance

PRO1 offers professionals a solution that enables them to make functional parts without the hassle of tinkering with settings. It is a fast, strong and impact resistant standard material suitable for all desktop FDM printers. It is a perfect material for prototyping and has been developed to withstand high stress or strain.

PRO1 offers major advantages:

– SPEED: Reduce your printing time by 30%-80%, (subject to printer and object limitations)
– STRENGTH: Excels overall beyond printed ABS in mechanical property
– VERSATILITY: One filament that can be tuned towards blazing speed and excellent surface finish
– CONSISTENCY: Truly consistent filament, also between colors and batches, it will perform as expected, every time

PRO1 - details

Link to: PRO1 Factsheet

Link to: PRO1 Comparison Sheet

Fast printing Strong settings Aesthetics setting
Print temp 220 °C ± 10 °C 220 °C ± 10 °C 210 °C ± 10 °C
Print speed 120 – 150 mm/s 120 – 150 mm/s ≤ 70 mm/s
Fill density ≥ 20% ≥ 20% (higher = stronger) ≥ 20%
Bed adhesion Clean glass Clean glass Clean glass
Fan speed 100% 100% 100%
Top/bottom thickness 1.2 mm 1.2 mm (thicker = stronger) 1.2 mm (thicker = stronger)
Layer height 0.1 mm ≤ 0.06 mm (smaller = stronger) ≤ 0.1 (smaller = better)
Bed temp 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue 60 °C or non-heated bed with tape/glue
PRO1 - Professional Series is available at;






Czech Republic:




United Kingdom:






the Professional Series


the standard in FDM printing

Subscribe to our


2 responses to “the Professional Series – PRO1”

  1. Avatar
    Micael Grahn says:

    Please let me know the chemical resistance for the material PRO1.
    We are running PRO1 and has divided the components in different parts and would like to understand if we can use epoxy to glue and reinforce the parts? Does the material withstand acetone? Any recommendation of what kind of filler should we use to smooth the surface?
    Please advise us.

  2. Avatar
    Hendrie Feringa says:

    Hi Micael,

    We are in contact with a customer who is using primer etc on his PRO1 prints
    “I have no experience with epoxy resin on a printed part. Well, I know that epoxy resin is used on printed parts. It’s called xtc3d or something. I would in any case use an automotive plastic adhesive primer. But I would definitely test the adhesion.
    I can also recommend a 2-component automotive primer / filler, which I myself tested with success. Epoxy resin becomes hard against primer / filler so it is also more likely to burst.”

    Hope this will help you!

Leave a Reply

Your email address will not be published. Required fields are marked *